- Видео 285
- Просмотров 23 342 533
Kody Horvey
Канада
Добавлен 4 ноя 2012
Business owner and journeyman carpenter, Kody Horvey, takes his experience of construction and delivers it for all who want a better DIY experience. There's a ton of little details to know when doing specific jobs and the intention is to demonstrate and show you what every one else leaves out. Of course, there are multiple ways to do the same job, we just hope our videos can make your DIY experience a bit faster and easier. Plus we want you to do the best job possible! Especially the 1st time, because who has time to do it twice?
Видео
Building generation homes the right way!
Просмотров 772Месяц назад
Building generation homes the right way!
How sustainable is ICF? #construction #ecofriendly #icf #nudura #energyefficiency #renovation
Просмотров 7672 месяца назад
How sustainable is ICF? #construction #ecofriendly #icf #nudura #energyefficiency #renovation
From Basement to Rooftop:Mastering the Ultimate ICF Transformation! ICF Talks with Kody Horvey Ep. 3
Просмотров 1,9 тыс.2 месяца назад
From Basement to Rooftop:Mastering the Ultimate ICF Transformation! ICF Talks with Kody Horvey Ep. 3
ICF FAQs | ICF Talks Sponsored by Nudura Ep. 2 #icf #nudura #construction #icfbuild #construction
Просмотров 8982 месяца назад
ICF FAQs | ICF Talks Sponsored by Nudura Ep. 2 #icf #nudura #construction #icfbuild #construction
Nudura 101 | ICF Talks Sponsored by Nudura Ep. 1
Просмотров 9883 месяца назад
Nudura 101 | ICF Talks Sponsored by Nudura Ep. 1
HOW TO INSTALL ELECTRICAL IN HOMEGA PANELS
Просмотров 5893 месяца назад
HOW TO INSTALL ELECTRICAL IN HOMEGA PANELS
If you’re thinking about learning ICF, watch this video.
Просмотров 1,2 тыс.4 месяца назад
If you’re thinking about learning ICF, watch this video.
How To Be A Pro And Mix Drywall Mud and Apply Tape!
Просмотров 5385 месяцев назад
How To Be A Pro And Mix Drywall Mud and Apply Tape!
Building Airtight with ICFs: Maximizing Efficiency
Просмотров 2,6 тыс.Год назад
Building Airtight with ICFs: Maximizing Efficiency
Airtightness in ICF Homes: The Key to Energy Efficiency
Просмотров 9 тыс.Год назад
Airtightness in ICF Homes: The Key to Energy Efficiency
Simple Tool for Building ICF to the Roof
Просмотров 9 тыс.Год назад
Simple Tool for Building ICF to the Roof
How to Install Electrical in Homega Panels
Просмотров 1,3 тыс.Год назад
How to Install Electrical in Homega Panels
NEW Basement Insulation - Before & After
Просмотров 805Год назад
NEW Basement Insulation - Before & After
YouTube Channel Trailer - Kody Horvey
Просмотров 3,9 тыс.Год назад
RUclips Channel Trailer - Kody Horvey
3 in 1 System to Frame & Insulate Your Basement
Просмотров 1,7 тыс.Год назад
3 in 1 System to Frame & Insulate Your Basement
Insulate & Frame Your Basement in One Step!
Просмотров 2,3 тыс.Год назад
Insulate & Frame Your Basement in One Step!
How to Drywall | 10 Must Do's Before You Start Your Drywall Renovation
Просмотров 1,4 тыс.Год назад
How to Drywall | 10 Must Do's Before You Start Your Drywall Renovation
How to Save Money - 7 Drywall Techniques
Просмотров 1,2 тыс.Год назад
How to Save Money - 7 Drywall Techniques
Nice
Good enough for who it’s for
Don't park your car in the garage. Problem solved.
Where you at where theres board on the walls before ceilings? No vapor barrier as well?
Question for you: we're installing an island on tile floor w. infloor heating (slab on grade). What can we use to secure the island to the floor? We're scared of hitting the in-floor with a screw...
no additional labor, more cost though, right?
Multiply run by tread?
What's the fire rating?
Wey nice work! In North Carolina plastic sheeting is not allowed as a moisture barrier anymore.
Very interesting! Thanks for sharing.
Thanks for this video. I have double French doors with a gap between them at the bottom third. There's already weather stripping but it's not wide enough. So I'll go through your inspection and try this. I couldn't tell though - do you just loosen the screws to slide the shims in or do you remove completely? Thanks.
Technically remove the hinges to get it fairly perfect to what you need would be best.
Brilliant!
Thank you!
Can you say hockey night in Canada for me…
Good idea to install wire protectors on the plastic stud locations still and be sure to run wires in locations less likely to be penatrated by fasteners....avoid places like baseboard , cabinet or picture height, as the wires won't move out of the way like they would in a hollow wall cavity if a screw or nail hits them.
Watched lots of videos for the best tip and came across yours. has to be the best out there. Ended up fitting like a pro. Thank you for making it so easy and straightforward. 👍
Thanknfir showing how it works
If the wall is under a cut and stack roof there still may be some roof bearing. Check for rafter purlins that kick or post down to that wall. They need to be considered. Also, I would strap the cut ceiling joists across the new beam at every, or every other, joist just in case there is any small amount of future horizontal force in the joists during a snow event (in snow country). Sometimes a cut and stack roof can have areas that are inadvertently using the ceiling system in a way similar to the bottom chord of a truss.
I love videos.
This is the best explanation about this; thank you, thank you God bless you !! 😊
Awesome, we also have some other great deck tips on your channel as well!
Did anyone hear a female voice in 2:05 or is it just me ?😅
Total garbage. Paint started lifting after 5 years. This from a siding that is supposed to come with a 50 year finish warranty. Total joke
Sorry to hear that, we have had good success so far.
Use the good stuff - Quality from Germany 😁👍
Have you tried the Kerdi Foam board? Much easier to use than the kerdi membrane that you have to attach to the wall with mastic.
Do it properly.... in brick.
I have no idea what a turnbuckle in this context is and I cant see the post. LOL What is going on?
“Incoming call” *scam likely*
Thanks for showing the consistency
iCFs were super appealing when I first heard about them. After talking to a few people who used them and doing some research on my own, I’m kind of torn. They are pretty simple to work with and if you’re experience with concrete, you’re really fast. And there is basically no easier way to get a consistently good insulation through you’re building enclosure. Building with concrete also has the added benefit of being extremely good with noise isolation. Hoover, imho the absolute dealbreaker for me is the material. Styrofoam is insanely flammable on its own so it’s treated with flame retardants to make it usable in construction. Flame retardants are a group of chemicals with dubious health effects I would personally love to avoid in my living spaces as far as I can possibly can.
What is the tape for just below the ceiling?
With a standard wall assembly you have studs, headers, etc. That lumber in the wall is taking up space where you can't have insulation. 2x lumber has a low R value so you also get thermal bridging at each stud location. An R20 (or whatever) wall is not really R20 because of the space in the wall the lumber takes is space insulation can't go, as well as the thermal bridging from the lumber itself. There are framing methods to reduce thermal bridging but they can get complicated to implement correctly. Other than window/door bucks ICF is continuous insulation with no thermal bridging or uninsulated space within the wall.
Great comment!
Also the ICF wall assembly is inherently air tight. A standard wood wall assembly leaks air like a sieve unless you do a ton of extra work to air seal everything (uncommon for most "normal" builders).
That looks so great!
Thank you!
NB- Pex is destroyed by uv light-make sure any exposed toilet supplies are covered with something; metal sleeve, etc. Inside cabinets probably safe though.
What kind of treated wood did you use.
Great video! Where can I find those shims?
How about some videos about icf pitched roofs
I see conflicting instructions on this... most install the top drip cap to go over the ledger board but under the decking boards. This drip cap looks like it will end up on top of the deck surface. I don't even know what to believe any more
If you installed the last deck board overtop, you would need a completely flat drip cap. The point of the bevel edge is to make sure the water does indeed run away from the house. That’s why we do ours this way.
Nice, but the joint right in the door corners isn't the best
Lol
If it wasn’t for the fiberglass insulation I’d say you’re doing a great job. You really need to get on board with closed cell spray foam up there in your cold climate.
We will post a video soon on spray foam. There’s a reason we do not use it.
Any wood structure with a poly vapor barrier is severely compromised the second you need outlets in an exterior wall or lighting in the lid. And how do you hang that poly? Well you start by poking it full of hole to staple it up, finished by poking it full of holes to hang the sheetrock. The one and only way to have a home that doesn’t have a compromised vapor barrier is to use closed cell spray foam insulation in the walls and on the roof. And you should be using that in the attics of your ICF houses as well. Air leakage is the single biggest driver of moisture into the walls and attics and with spray foam insulation air leakage doesn’t exist.
We will find a video of spray foam and post it soon for you. Spray foam isint as proofed as you may think. Lots of heat loss from it.
It would be so easy if you Americans embraced metric measurements.
You could also hire professional drywallers
Kody Horvey, This video is fantastic! I liked it a lot!
Thanks! All about tips and keeping things simple and clear.
In your ICF vs 2x6 stick frame cost, are you also factoring in all of the extra air sealing details and costs to get a similar level of performance (blower door test scores)?
Watching this and taking notes, then happily realizing you're in RD County, too.
In the planning ahead department, knowing the block dimensions for corners and full blocks, couldn't the footings be designed to land on the proper 2" increment? This would minimize any funny cuts.
A video made by 'up to Kode' with no discussion about deck code. Did he follow code?
Do you have a paetron account or link?
When doing the concrete pour by the floor (as you described for the basement) are there any issues with cold joints between the separate concrete pours for each floor?
OK. I am not a builder, so take my comments in context. I have a question for the building science and/or ICF folks. There is a lot of chatter about concrete not being an environmentally friendly material. I did a quick and dirty calculation of how much embodied CO2 is in my mythical 2400 square footage (1,800 wall square footage) house. My calc (with a pretty large contingency) for total concrete was 42 yards. This was for the walls only, not the foundation, driveway, etc. I am assuming you need those things anyway whether you build with wood or other materials. According to the PCA, a yard of concrete has 400 lbs of embodied CO2. Doing the math, this equates into approximately 17,000 lbs or 8 tons of CO2. I also looked at what the average house generates in heating and cooling in CO2 per year. The numbers vary widely, depending on where you live, but the lowest number I saw was around 3 tons per year to heat and cool. I would seem that concrete would be the clear winner in that getting to passive (or close to it) is relatively easy and the payback to recover the original 8 tons of CO2 "investment" in the original build would be recovered in a couple of years, certainly less than 10 years. Am I missing something in my math?
how do you set in lath and plaster where there is no stud?